CN5086 Electric Motor

new - Products
CN5086 Electric Motor

At a glance data:

Voltage/Frequency:

4000V ± 10%/60 Hz

Type of EX-Protection:

Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC)

Electric Motor Type:

Squirrel Cage Induction Motor

Mounting Designation:

F1 or F2

Print CN5086 Spec Sheet

Overview

Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

Electric Motor Specifications

Voltage/Frequency:

4000V ± 10%/60 Hz

Type of EX-Protection:

Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC)

Electric Motor Type:

Squirrel Cage Induction Motor

Mounting Designation:

F1 or F2

Number of Poles:

Full Load Speed:

894.0r/min

Connection of Stator Winding:

Star

Rated Torque:

29366lb/ft

Standards:

NEMA MG1

Maximum Altitude - Before Derate:

3000ft

Service Factor:

1.15SF

No Load Current:

200 Amps

Maximum Ambient Temperature:

104°F

Temperature Rise:

Class B at rated load

Shaft:

8.5in

Insulation:

Class F

Enclosure Type/Method of Cooling:

WP-II

Duty:

Continuous

Locked Rotor Amps:

520% Code E

Full Load Current:

658 Amps

Locked Rotor Torque:

60%

Breakdown Torque:

190%

Standard Equipment

bearings

Self-lubricated sleeve bearings
Insulated non-drive end bearings to reduce bearing currents
Bearing RTDs for temperature monitoring

rotors

Designed for minimal vibration
Dynamic balancing at full operational speed
Fabricated copper squirrel cages
Oversized, forged, keyless shaft
AISI 4140/DIN42CrMo4 shaft

stators

Radial air ducts ensure uniform and efficient cooling
Vacuum pressure impregnated with specially formulated epoxy resin
2X RTDS per Phase
Space heater
Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges