At a glance data:
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
Overview
Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.
Electric Motor Specifications
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
Electric Motor Type:
Squirrel Cage Induction Motor
Number of Poles:
8
Maximum Ambient Temperature:
104°F
Full Load Current:
458 Amps
Shaft:
8.5in
Rated Torque:
20555lb/ft
Maximum Altitude - Before Derate:
3300ft
Locked Rotor Amps:
540% Code E
Connection of Stator Winding:
Star
Standards:
NEMA MG1
Duty:
Continuous
Enclosure Type/Method of Cooling:
WP-II
Locked Rotor Torque:
60%
Service Factor:
1.15 SF (1.0 VFD)
No Load Current:
137 Amps
Insulation:
Class F
Temperature Rise:
Class B at rated load
Standard Equipment
bearings
- Bearing RTDs for temperature monitoring
- Insulated non-drive end bearings to reduce bearing currents
- Anti-friction on 1500 hp (optional)
rotors
- Designed for minimal vibration
- Dynamic balancing at full operational speed
- Fabricated copper squirrel cages
- Forged, keyless shaft
- AISI 4140/DIN42CrMo4 shaft
stators
- Radial air ducts ensure uniform and efficient cooling
- Vacuum pressure impregnated with specially formulated epoxy resin
- 2X RTDS per Phase
- Space heater
- Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges
Optional Equipment
CN1566 Electric Motor
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
CN5086 Electric Motor
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
CN3086 Electric Motor for Gas Compression
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
Similar Products
CN1566 Electric Motor
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
CN3086 Electric Motor for Gas Compression
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm
CN5086 Electric Motor
Type of EX-Protection:
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Mounting Designation:
F1 or F2
Voltage/Frequency:
4000V & 4160V ± 10%/60 Hz
Full Load Speed:
894 rpm