At a glance data:
Base Power (1st Gear) - Net:
238hp
Engine Model:
Cat C13
Bore:
5.1in
Stroke:
6.2in
Overview
Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.
Engine
Base Power (1st Gear) - Net:
238hp
Engine Model:
Cat C13
Bore:
5.1in
Stroke:
6.2in
Speed at Rated Power:
1,850 rpm
Note (3):
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability:
122°F
Note (2):
Optimized VHP Plus is standard for the 14M3.
Torque Rise:
41%
Maximum Altitude - Full Power:
13900ft
Maximum Torque - VHP Plus:
1137lb/ft
Emissions:
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3):
14349ft
Maximum Altitude - Full Power (Tier 2):
12049ft
Note (1):
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum:
550 rpm
Note (4):
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Displacement:
763in³
Number of Cylinders:
6
Weights
Operating Weight - Typically Equipped:
57250lb
Moldboard
Blade Width:
14ft
Frame
Circle - Outer Diameter:
71.7in
Front Axle - Wheel Lean - Left/Right:
17.1°
Front Axle - Total Oscillation per Side:
32°
Service Refill Capacities
Transmission and Differential:
23.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only):
5.8gal (US)
Hydraulic System:
33gal (US)
Circle Drive:
1.8gal (US)
Cooling System:
15.9gal (US)
Fuel Tank:
109.9gal (US)
Moldboard
Arc Radius:
16.3in
Throat Clearance:
4.6in
Blade Width - With End Bits:
169in
Blade Height - With Cutting Edge:
24.9in
Blade Width - Without End Bits:
164in
Blade Height - Without Cutting Edge:
23in
Blade Range
Maximum Depth of Cut:
23.3in
Circle Centershift - Left:
25.6in
Maximum Lift Above Ground:
16.5in
Circle Centershift - Right:
20.5in
Blade Tip Range - Backward:
5°
Maximum Shoulder Reach Outside of Tires - Right:
78.9in
Moldboard Sideshift - Right:
31.1in
Moldboard Sideshift - Left:
29.1in
Maximum Shoulder Reach Outside of Tires - Left:
73.6in
Blade Tip Range - Forward:
40°
Weights
Gross Vehicle Weight - Base* - Total:
50980lb
Gross Vehicle Weight - Base* - Front Axle:
13994lb
Gross Vehicle Weight - Typically Equipped - Total:
57250lb
Gross Vehicle Weight - Typically Equipped - Rear Axle:
42005lb
Gross Vehicle Weight - Typically Equipped - Front Axle:
15245lb
Gross Vehicle Weight - Base* - Rear Axle:
36994lb
Engine
Note (5):
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Weights
Note:
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Air Conditioning System
Air Conditioning:
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Engine
Standard - Fan Speed - Maximum:
1,600 rpm
Standard Equipment
note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
operator environment
- Joystick, power adjustable armrests
- Air conditioner with heater
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
- Gauges, machine level
- Message display
- Joystick gear selection
- Joystick hydraulic controls for implements, steering, transmission
- Ladders, cab, left and right side
- Lights, left and right side lights
- Lights, night time cab, LED
- Meter, hour, digital
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio ready, entertainment
- ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
- Seat, mechanical suspension, cloth
- Storage compartments
- Throttle control, electronic
power train
- Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
- Articulation, automatic Return-to-Center
- Air-to-Air After Cooler (ATAAC)
- Auto Diff Lock
- Brake wear indication
- Brakes, oil disc, four-wheel, hydraulic
- Consistent power to ground
- Monitoring system
- Clutch, circle drive slip
- Differential, lock/unlock*
- Drain, engine oil, ecology
- Demand fan, hydraulic
- Engine ECO Mode
- Ether starting aid
- Fuel tank, ground level
- Fuel-water separator
- Hydraulic demand fan
- Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
- Optimized VHP
- Parking brake - multi disc, sealed, oil-cooled
- Priming pump, fuel
- Sediment drain, fuel tank
- Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
- Transmission, 8F/6R, power shift, direct drive
electrical
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, HD, 1,125 CCA
- Breaker panel
- Electrical system, 24V*
- Belt, serpentine, automatic tensioner
- Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
- Product Link
- Starter, electric
- Service lights, enclosure, rear, LED
safety
- Alarm, back up
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Lockout, hydraulic implement for roading
- Operator Not Present Monitoring system
- Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
- Seat belt, retractable 76 mm (3 in)
- Secondary steering
- Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
Optional Equipment
note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
operator environment
- Air horn
- Heated door
- Mirrors high visibility
- Mirrors, outside heated 24V
- Mirrors, outside mounted
- Seat, heated
- Seat, heated/ventilated
- Rearview camera
- Seat belt indicator
power train
- Transmission, autoshift
- Engine, compression brake
technology
- Cat GRADE with Cross Slope
- Stable Blade
- Advanced Control Joysticks
- Auto Articulation
guards
- Debris guard
- Front axle cylinder guards
- Rear fenders
- Sound suppression, engine enclosure and transmission
- Transmission guard
- Accumulators, blade lift
- Fast fill fuel, 378.5 L/min (100 gal/min)
- Metallic DCM wear strips
electrical
- Light, LED, warning strobe
- Lights, front headlights high
- Lights, front headlights low
- Mounting, for warning light
- Working lights halogen
- Working lights LED
safety
- Additional rearview camera and monitor
- Machine security system key
other attachments
- Moldboard, 4.9 m (16 ft)
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
- Product Link satellite, cellular
- Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
- Snow wing, mounting frame ready
- Fast fill
work tools/g.e.t.
- 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
- Push block, counterweight
- Ripper, rear
- Tooth, ripper
fluids
- Coolant, -51 degrees C (-60 degrees F)
Similar Products
