930M Waste Handler Small Wheel Loader

new - Products
930M Waste Handler Small Wheel Loader

At a glance data:

Maximum Gross Power:

168hp

Bore:

4in

Stroke:

5in

Displacement:

427in³

Print 926M, 930M, 938M Waste Handlers Product Brochure Small Wheel Loader Attachments Brochure Retrofit Options and Accessories for Small Wheel Loaders

Overview

The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Engine

Maximum Gross Power:

168hp

Bore:

4in

Stroke:

5in

Displacement:

427in³

Note (3):

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4):

168hp

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4):

1800r/min

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4):

601ft·lbf

Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*):

1600r/min

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*):

586ft·lbf

Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*):

160hp

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4):

588ft·lbf

Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*):

573ft·lbf

Emissions:

The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.

Engine Model:

Cat® C7.1

Note (1):

*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (2):

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*):

572ft·lbf

Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4):

587ft·lbf

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4):

166hp

Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4):

170hp

Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4):

163hp

Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4):

164hp

Engine Power - ISO 14396 - Metric:

170hp

Engine Power - ISO 14396:2002:

168hp

Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*):

162hp

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*):

158hp

Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*):

156hp

Net Power (Standard Power Mode: Range 1-3*):

1600r/min

Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*):

156hp

Net Power (Performance Power Mode: Range 1-4):

1800r/min

Buckets

Bucket Capacities:

3.0-5.0 m3 (3.9-6.5 yd3)

Operating Specifications

Note (2):

^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

Note (1):

**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

Full Turn Tip Load (2):

9525 kg (20,998 lb)^

Full Turn Tip Load (1):

8573 kg (18,900 lb)**

Weights

Operating Weight:

37713lb

Note (2):

^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

Note (1):

**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

Operating Weight (1):

15 381 kg (33,908 lb)**

Operating Weight (2):

17 107 kg (37,713 lb)^

Cab

ROPS:

ISO 3471:2008

FOPS:

ISO 3449:2005 LEVEL II

Note (1):

* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
– The Blue Angel environmental label is an optional attachment for Europe only.

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*:

68dB(A)

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*:

101dB(A)

Air Conditioning System

Air Conditioning:

The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Loader Hydraulic System

Maximum Flow - Implement Pump:

50gal/min

Maximum Working Pressure - Implement Pump:

3771psi

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift):

5.1/5.7 seconds

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure:

4061psi

Relief Pressure - Tilt Cylinder:

4061psi

Note (1):

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height):

1.5/1.7 seconds

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level):

2.7/2.7 seconds

Note (2):

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Maximum Flow - Implement Pump - 4th Function Maximum Flow*:

42gal/min

Note (3):

* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure:

4061psi

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time:

9.3/10.1 seconds

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*:

50gal/min

Lift Cylinder: Standard Lift Linkage - Stroke:

28.7in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter:

5.9in

Lift Cylinder: Standard Lift Linkage - Bore Diameter:

4.7in

Lift Cylinder: Standard Lift Linkage - Rod Diameter:

2.6in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter:

3.5in

Tilt Cylinder: Standard Lift Linkage - Stroke:

21.9in

Steering

Steering Cylinder, Double Acting - Bore Diameter:

2.8in

Steering Cylinder, Double Acting - Rod Diameter:

1.6in

Maximum Steering Torque - 0° (Straight Machine):

37155ft·lbf

Steering Cylinder, Double Acting - Stroke:

17.2in

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed:

2.4s

Maximum Working Pressure - Steering Pump:

3500psi

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited:

2.8s

Maximum Steering Torque - 40° (Full Turn):

27747ft·lbf

Note (1):

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Note (2):

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Maximum Flow - Steering Pump:

34gal/min

Transmission

Forward and Reverse - Range 4:

25mile/h

Forward and Reverse - Range 3:

17mile/h

Forward and Reverse - Range 2:

8mile/h

Note:

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

Forward and Reverse - Range 1*:

1-13 km/h (0.6-8 mph)

Power Train

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65:

± 10.5 degrees

Note (3):

Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.

Note (2):

Offset rims available to meet European roading requirements.

Rear Axle:

Oscillating

Front Axle:

Fixed

Brakes - Parking:

Spring applied hydraulically released

Note (1):

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Front Axle - Traction Aid:

Locking differential

Rear Axle - Traction Aid - Optional:

Limited slip differential

Brakes - Service:

Inboard wet disc

Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder:

± 7 degrees

Service Refill Capacities

Cooling System:

7.9gal (US)

Engine Crankcase:

5.3gal (US)

Axles - Rear:

6.6gal (US)

Hydraulic Tank:

23.8gal (US)

Transmission - Gear Box:

2.2gal (US)

Fuel Tank:

51.5gal (US)

Axles - Front:

6.9gal (US)

Diesel Exhaust Fluid (DEF) Tank:

5gal (US)

Hydraulic System - Including Tank:

43.6gal (US)

Sustainability

Recyclability:

94%

Standard Equipment

power train

Axle Duo-Cone™ seal guards
Auto idle shut down feature
Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)
Coded start (requires secondary display)
Differential lock in front axle
Enclosed wet disc full hydraulic brakes
Hydraulically driven demand cooling fan
Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed
Parking brake, electric
Single plane cooling package wide six fins per inch density
Oil sampling ports
Throttle lock and max speed limiter

hydraulics

Automatic lift lower and tilt kickouts, adjustable in-cab
Bucket and fork modes, adjustable in-cab
Cylinder damping at kickout and mechanical end stops
Fine mode control (fast, medium, slow)
Hydraulic response setting (fast, medium, slow)
Load sensing hydraulics and steering
Seat-mounted hydraulic joystick controls

electrical

Alternator, 115 amp, heavy duty
Batteries, 1,000 CCA (2) 24V system, disconnect switch
Back-up alarm
Emergency shutdown switch
Halogen work and roading lights, LED rear tail lights
Product Link PRO with three year subscription
Remote jump start post
Resettable main and critical function breakers

operator environment

75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
Automatic temperature control
Cab, pressurized
Camera, rearview
External heated mirrors with lower parabolic
Ground level cab door release
Hydraulic control lockout
Mirror, single
Lunch box storage
Radio ready speakers
Rear window defrost, electric
Column mounted multi function control – lights, wipers, turn signal
Tilt and telescopic steering wheel
Tinted front glass
Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
Suspension seat, fabric

other standard equipment

Large-access enclosure doors with adjustable close/open force
Cat optimized Z-bar linkage with parallel lift
Recovery hitch, with pin
Remote mounted lubrication points
Lockable compartments and enclosures

Optional Equipment

optional equipment

Autolube, integrated in secondary display
Auxiliary flow, third and fourth function
Differential, limited slip, rear
Beacon light, strobe
Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages)
Camera, roof mounted, front view with separate display
Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Counterweight, additional options
Coupler, (Fusion and ISO 23727)
Debris packages (low, medium, high)
Fenders (extended cover and full coverage)
Guarding packages
Linkage, high lift
Lights, auxiliary, halogen or LED with engine and DEF compartment lights
Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer
Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
Radio packages
Rear Object Detection
Ride Control System, adjustable through secondary display
Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
Steering
– Dual mode and secondary
Tire Pressure Monitoring (TPM)