930M Ag Handler Small Wheel Loader

new - Products
930M Ag Handler Small Wheel Loader

At a glance data:

Maximum Gross Power:

168hp

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4):

601ft·lbf

Stroke - Performance Power Mode: Range 1-4:

5.3in

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4):

1800r/min

Print 930M Ag Handler Small Product Brochure 930M/938M Ag Handler Large Product Brochure Small Wheel Loader Attachments Brochure Retrofit Options and Accessories for Small Wheel Loaders

Overview

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Engine

Maximum Gross Power:

168hp

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4):

601ft·lbf

Stroke - Performance Power Mode: Range 1-4:

5.3in

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4):

1800r/min

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4):

797N·m

Displacement (Performance Power Mode: Speed Range 1-4):

428in³

Emissions:

Engine meets U.S. EPA Tier 4 Final emission standards.

Engine Model:

Cat® C7.1

Note (4):

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Maximum Rated Gross Power - ISO 14396:

168hp

Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4):

170hp

Note (2):

**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (3):

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4):

168hp

Note (1):

*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Bore (Standard Power Mode: Range 1-4):

4.1in

Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**):

156hp

Stroke (Standard Power Mode: Range 1-3**):

5.3in

Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**):

156hp

Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**):

1600r/min

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4):

166hp

Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4):

164hp

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**):

158hp

Bore (Standard Power Mode: Range 1-3**):

4.1in

Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4):

587ft·lbf

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**):

795N·m

Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**):

776N·m

Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4):

163hp

Displacement (Standard Power Mode: Range 1-3**):

428in³

Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**):

160hp

Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**):

162hp

Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**):

573ft·lbf

Maximum Rated Gross Power - ISO 14396 (metric):

170mhp

Buckets

Bucket Capacities:

2.1-5.0 m³ (2.7-6.5 yd³)

Weights

Operating Weight:

31382lb

Cab

ROPS:

ISO 3471:2008

FOPS:

ISO 3449:2005 Level II

Steering

Note (2):

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Loader Hydraulic System

Relief Pressure - Tilt Cylinder:

4351psi

Steering

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left:

3.5turns

Tires

Standard Size:

20.5 R25, radial (L-3)

Service Refill Capacities

Transmission - Gear Box:

2.2gal (US)

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Total Cycle Time:

10.1s

Maximum Flow - Implement Pump:

50gal/min

Service Refill Capacities

Cooling System:

7.9gal (US)

Loader Hydraulic System

Maximum Flow - Implement Pump - 4th Function Maximum Flow*:

42gal/min

Service Refill Capacities

Diesel Exhaust Fluid (DEF) Tank:

5gal (US)

Cab

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*:

101dB(A)

Power Train

Note:

*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).

Service Refill Capacities

Fuel Tank:

51.5gal (US)

Steering

Maximum Flow - Steering Pump:

34gal/min

Loader Hydraulic System

Note (2):

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Transmission

Forward - Range 2:

8mile/h

Forward - Range 1*:

1-13 km/h (0.6-8 mph)

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height):

1.5s

Note:

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.

Power Train

Rear Axle:

Oscillating

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time:

9.3s

Steering

Steering Cylinder, Double Acting - Bore Diameter:

2.8in

Steering Cylinder, Double Acting - Stroke:

17.2in

Power Train

Note (2):

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Buckets

Bucket Capacities - Light Material:

3.1-5.0 m³ (4.0-6.5 yd³)

Operating Specifications

Full Turn Tip Load:

19424lb

Transmission

Reverse - Range 4:

25mile/h

Service Refill Capacities

Axles - Rear:

6.6gal (US)

Air Conditioning System

Air Conditioning:

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Service Refill Capacities

Hydraulic System - Including Tank:

43.6gal (US)

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level):

2.7s

Cab

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*:

68dB(A)

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift):

5.1s

Steering

Note (1):

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level):

2.7s

Service Refill Capacities

Engine Crankcase:

5.3gal (US)

Tires

Note (2):

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure:

4061psi

Steering

Maximum Working Pressure - Steering Pump:

3500psi

Power Train

Front Axle:

Fixed

Tires

Note (1):

Other tire choices are available. Contact your Cat dealer for details.

Transmission

Reverse - Range 2:

8mile/h

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height):

1.7s

Transmission

Note:

Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.

Forward - Range 3:

17mile/h

Steering

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited:

2.8s

Service Refill Capacities

Axles - Front:

6.9gal (US)

Hydraulic Tank:

23.8gal (US)

Steering

Steering Articulation Angle - Each Direction:

40°

Axles

Rear:

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Loader Hydraulic System

Maximum Working Pressure - Implement Pump:

4061psi

Transmission

Forward - Range 4:

25mile/h

Steering

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed:

2.4s

Axles

Front:

Fixed; Locking differential (standard)

Transmission

Reverse - Range 3:

17mile/h

Power Train

Front Axle - Traction Aid*:

Locking differential standard

Steering

Steering Cylinder, Double Acting - Rod Diameter:

1.6in

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure:

4351psi

Power Train

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25:

± 10.5 degrees

Transmission

Reverse - Range 1*:

8mile/h

Cab

Note (1):

*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.

Loader Hydraulic System

Note (1):

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Power Train

Brakes - Service:

Inboard wet disc

Rear Axle - Traction Aid:

Limited slip differential optional

Brakes - Parking:

Spring applied hydraulically released

Tires

Other Choices Include:

20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift):

5.7s

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*:

50gal/min

Lift Cylinder: Standard Lift Linkage - Bore Diameter:

4.3in

Tilt Cylinder: Standard Lift Linkage - Stroke:

21.9in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter:

2.8in

Lift Cylinder: Standard Lift Linkage - Rod Diameter:

2.4in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter:

5.1in

Lift Cylinder: Standard Lift Linkage - Stroke:

28.7in

Power Train

Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65:

± 7 degrees

Dimensions with Bucket - Standard Lift

Height - Ground Clearance**:

1.3ft

Dimensions with Bucket - High Lift

Length - Rear Axle to Bumper:

6.5ft

Dimensions with Bucket - Standard Lift

Rack Angle at Carry:

43°

Dimensions with Bucket - High Lift

Departure Angle:

33°

Height - Overall**:

18.7ft

Dimensions with Bucket - Standard Lift

Departure Angle:

33°

Dimensions with Bucket - High Lift

Reach - Bucket at 45°*:

4.4ft

Dimensions with Bucket - Standard Lift

Length - Wheel Base:

9.8ft

Length - Rear Axle to Bumper:

6.5ft

Turning Radius - Over Bucket:

19.5ft

Carry Height - Bucket Pin:

1.3ft

Width - Over Tires:

8.3ft

Dimensions with Bucket - High Lift

Dump Angle at Full Lift:

48°

Dimensions with Bucket - Standard Lift

Note (2):

**Vary with tire.

Dimensions with Bucket - High Lift

Width - Bucket:

8.4ft

Dimensions with Bucket - Standard Lift

Dig Depth**:

3.9in

Turning Radius - Outside of Tires:

17.7ft

Clearance - Level Bucket**:

11.75ft

Clearance - Bucket at 45°*:

9.1ft

Rack Angle at Full Lift:

54°

Height - Overall**:

17.1ft

Dimensions with Bucket - High Lift

Length - Wheel Base:

9.8ft

Dimensions with Bucket - Standard Lift

Width - Bucket:

8.4ft

Height - Ground to Axle Center**:

2.25ft

Dimensions with Bucket - High Lift

Width - Tread Center:

6.3ft

Dimensions with Bucket - Standard Lift

Height - Bucket Pin**:

12.8ft

Dimensions with Bucket - High Lift

Length - Hitch to Front Axle:

4.9ft

Dimensions with Bucket - Standard Lift

Operating Weight:

31125lb

Dimensions with Bucket - High Lift

Height - Ground to Axle Center**:

2.25ft

Note (1):

*Vary with bucket.

Dimensions with Bucket - Standard Lift

Width - Tread Center:

6.3ft

Turning Radius - Inside of Tires:

9.4ft

Reach - Bucket at 45°*:

3.6ft

Dimensions with Bucket - High Lift

Clearance - Bucket at 45°*:

10.7ft

Height - Bucket Pin**:

14.4ft

Dimensions with Bucket - Standard Lift

Length - Overall*:

24.9ft

Dimensions with Bucket - High Lift

Height - Ground to Beacon**:

12.2ft

Carry Height - Bucket Pin:

1.9ft

Clearance - Load over Height**:

11.6ft

Turning Radius - Outside of Tires:

17.7ft

Dimensions with Bucket - Standard Lift

Clearance - Load over Height**:

10.9ft

Dimensions with Bucket - High Lift

Turning Radius - Over Bucket:

20.6ft

Rack Angle at Full Lift:

51°

Rack Angle at Carry:

47°

Length - Overall*:

27ft

Note (2):

**Vary with tire.

Height - Ground to Cab**:

10.9ft

Dimensions with Bucket - Standard Lift

Length - Hitch to Front Axle:

4.9ft

Dimensions with Bucket - High Lift

Turning Radius - Inside of Tires:

9.4ft

Clearance - Level Bucket**:

13.4ft

Width - Over Tires:

8.3ft

Note (3):

Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.

Dimensions with Bucket - Standard Lift

Height - Ground to Beacon**:

12.2ft

Articulation Angle:

40°

Dimensions with Bucket - High Lift

Dig Depth**:

5.3in

Articulation Angle:

40°

Operating Weight:

31441lb

Dimensions with Bucket - Standard Lift

Height - Ground to Cab**:

10.9ft

Dimensions with Bucket - High Lift

Height - Ground Clearance**:

1.3ft

Dimensions with Bucket - Standard Lift

Note (3):

Note (1):

*Vary with bucket.

Dump Angle at Full Lift:

48°

Sustainability

Recyclability:

94%

Standard Equipment

power train

Auto idle shut down feature
Cat C7.1 engine
- Power modes (Standard and Performance)
- Power by range (High Power in Range 4)
- Turbocharged and aftercooled
- Diesel particulate filter (Fit for Life)
Coded start (requires secondary display)
Differential lock in front axle
Enclosed wet disc full hydraulic brakes
Oil sampling ports
Hydraulically driven demand cooling fan
Hydrostatic transmission with electronic control
- Operator modes (Default, TC, Hystat™, and Ice)
- Directional Shift Aggressiveness (fast, medium, slow)
- Rimpull control, adjust wheel torque
- Creeper control, adjust ground speed
Axle Duo-Cone™ seal guards
Parking brake, electric
Single plane cooling package wide six fins per inch density
Throttle lock and max speed limiter

hydraulics

Automatic lift lower and tilt kickouts, adjustable in-cab
Bucket and fork modes, adjustable in-cab
Cylinder damping at kickout and mechanical end stops
Fine mode control (fast, medium, slow)
Hydraulic response setting (fast, medium, slow)
Load sensing hydraulics and steering
Load sensing hydraulics and steering

electrical

Alternator, 115 amp, heavy duty
Batteries, 1,000 CCA (2) 24V system, disconnect switch
Back-up alarm
Halogen work and roading lights, LED rear tail lights
Product Link™ PRO with three year subscription
Remote jump start post
Resettable main and critical function breakers

operator environment

Cab, pressurized
75 mm (3 in) retractable seat belt, with audible alarm and indicator
Automatic temperature control
External heated mirrors with lower parabolic
Hydraulic control lockout
Ground level cab door release
Suspension seat, fabric
Lunch box storage
Radio ready speakers
Rear window defrost, electric
Mirror, single
Column mounted multi function control – lights, wipers, turn signal
Tilt and telescopic steering wheel
Tinted front glass
Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
Camera, rear view

other standard equipment

Cat optimized Z-bar linkage with parallel lift
Large-access enclosure doors with adjustable close/open force
Recovery hitch, with pin
Remote mounted lubrication points
Lockable compartments and enclosures

Optional Equipment

optional equipment

Auto lube, integrated in secondary display
Auxiliary flow, third and fourth function
Beacon light, strobe
Cab, deluxe (standard in Europe)
- Camera, rear view integrated into advanced display
- Electrically adjustable external heated mirrors (2)
- Secondary display to enable features and adjust parameters
- LED interior lighting
- Sunscreen, front and rear
- Touchscreen secondary display
- Ride control adjustable speed activation
- Preventative maintenance reminders
- Integrated help function (26 languages)
Camera, roof mounted, front view with separate display
Cat Production Measurement weigh scale system integrated into secondary display
Cold start package
- Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Coupler, (Fusion and ISO 23727)
Fenders (extended cover and full coverage)
Differential, limited slip, rear
Guarding packages
Lights, auxiliary, halogen or LED with engine and DEF compartment lights
Linkage, high lift
Payload Technology
- Cat Production Measurement (CPM)
- CPM Printer
Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
Radio packages
Ride Control System, adjustable through secondary display
Seats
- Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
- Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
Steering
- Dual mode and secondary
Tire Pressure Monitoring (TPM)
Counterweight, additional options
Debris packages (low, medium, high)
Rear Object Detection