At a glance data:
Milling Width:
79.1in
Rated Power:
806hp
Operating Weight:
79653lb
Maximum Milling Depth:
13in
Overview
The PM820 is a high-production, half-lane milling machine with a cutting width of 2010 mm (79.1 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
Cutting System
Milling Width:
79.1in
Power Train
Rated Power:
806hp
Weights
Operating Weight:
79653lb
Cutting System
Maximum Milling Depth:
13in
Rotor Speeds:
100 / 109 / 118 rpm
Number of Bits:
178
Power Train
Engine:
Cat C18 twin-turbo
Maximum Travel Speed:
3.7mile/h
Maximum Milling Speed:
328ft/min
Dimensions
Operating Length - Conveyor Up:
47.64ft
Operating Width:
10.2ft
Height - Canopy:
13.29ft
Maximum Truck Clearance:
15.94ft
Minimum Right Cutting Radius:
6.56ft
Minimum Left Cutting Radius:
6.56ft
Conveyor Swing:
60 degrees from center
Transport Length:
40.78ft
Transport Width:
8.27ft
Transport Height:
9.84ft
Weights
Transport Weight:
71055lb
Service Refill Capacities
Cooling System:
27.5gal (US)
Engine Oil:
17.2gal (US)
Fuel Tank:
292.7gal (US)
Hydraulic Tank:
29.9gal (US)
Water Spray System Tank:
898.2gal (US)
Standard Equipment
operator environment
- Ground control keypads
- Single high-resolution LCD touchscreen display
- 12-volt power receptacle
cat connect technology
- Cat Product Link
- Cat GRADE
conveyor
- Grease tensioner
- Material removal boost feature
rotor system
- Automatic plunge-cut
- Automatic transition feature
- Obstacle jump
- Three cutting speeds
powertrain
- Auto engine idle control
- High capacity cooling system
- Dual propel pumps
- Automatic load control
hydraulic system
- Dual pump hydraulic propel system
- Traction control
service and maintenance
- Sampling ports for Scheduled Oil Sampling (S·O·S℠)
- Power hood
- Platform-level engine oil dipsticks
- Rotor chamber water spray system
- Air compressor
- Accessory drive system
- 3400 L (898 gal) onboard water tank
- Side water fill valve
safety and security
- Platform handrails
- Signaling/warning horn
- Wide-dispersion LED work lights
Optional Equipment
operator environment
- Dual high-resolution LCD touchscreen displays
- Hydraulically folding canopy with LEDs
- Air-ride suspension seats
- Windscreens
cat connect technology
- Inboard ski
- Sonic sensor (averaging or string line)
- Ground level grade controls and displays
conveyor
- Dust abatement system
- Remote camera (loading conveyor)
rotor system
- System K Rotor - Course (25 mm)
- System K Rotor - Course (18 mm)
- System K Rotor - Standard (15 mm)
- System K Rotor - Fine (8 mm)
- System K Rotor - Micro (6 mm)
- System H Rotor - Micro (6x2 mm)
- Diamond bits
- Bit bucket trays
- Pneumatic bit removal tool
- Tool holder extractor
- Rotor turning device with pendant control
powertrain
- CE certificate
hydraulic system
- Water tank transfer pump
- Fuel transfer pump
service and maintenance
- High pressure washdown
- Low pressure washdown
- Additional spray bars
safety and security
- Perimeter LED strip lights
- Magnetic LED work light
- Warning beacon (fixed or magnetic mount)
- Truck signal lights
- Remote camera (rear, front, magnetic mount)
PM620 Cold Planer
Milling Width:
79.1in
Rated Power:
806hp
Operating Weight:
79653lb
Maximum Milling Depth:
13in
PM822 Cold Planer
Milling Width:
79.1in
Rated Power:
806hp
Operating Weight:
79653lb
Maximum Milling Depth:
13in
Similar Products
PM825 Cold Planer
Milling Width:
79.1in
Rated Power:
806hp
Operating Weight:
79653lb
Maximum Milling Depth:
13in
PM820 Cold Planer
Milling Width:
79.1in
Rated Power:
806hp
Operating Weight:
79653lb
Maximum Milling Depth:
13in
PM622 Cold Planer
Milling Width:
79.1in
Rated Power:
806hp
Operating Weight:
79653lb
Maximum Milling Depth:
13in