At a glance data:
Maximum Rating:
605 kVA
Minimum Rating:
605 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
Maximum Rating:
605 kVA
Minimum Rating:
605 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts
Frequency:
50 Hz
Speed:
1500 rpm
Duty Cycle:
Standby
Engine Specifications
Engine Model:
C15 In-line 6, 4-cycle diesel
Bore:
5.4in
Stroke:
6.8in
Displacement:
928in³
Compression Ratio:
16.1:1
Aspiration:
Turbocharged Air-to-Air Aftercooled
Fuel System:
EUI
Governor Type:
Adem™A4
Generator Set Dimensions
Length - Maximum:
131in
Width - Maximum:
60.6in
Height - Maximum:
86.1in
Dry Weight - Genset (maximum):
8120lb
Standard Equipment
engine
- Cat® C15 Inline 6 cylinder, 4 stroke diesel
control panels
- GCCP 1.1
air inlet
- Air cleaner
governor
- Mechanical governor
alternator
- A Frame standard alternator
cooling
- Package mounted radiator
fuel storage
- Single wall 8 hour fuel tank
cooling system
- Caterpillar extended life coolant
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
electrical options
- 3 Pole Circuit breaker
- Neutral earth link
- 24 Volt battery with rack and cables
fuel
- Secondary fuel filters
- Fuel priming pump
- Primary fuel filter with integral water separator
air inlet system
- Air cleaner; light duty with disposable element
generator
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
lube system
- Lubricating oil
- Oil drain line with valve
mounting system
- Captive linear vibration isolators
- Lifting provision and drag points
general
- Engine and alternator pre paint, Caterpillar yellow
- Engine and alternator pre paint, Caterpillar yellow
power termination
- Busbar
generator and attachments
- Power center, IP22
- Segregated low voltage (AC/DC) wiring panel
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
mounting
- Rubber vibration isolators
governing system
- Cat electronic governor (ADEM A4).
lube system
- Oil cooler
- Oil drain valves
mounting system
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Optional Equipment
exhaust
- Industrial, residential, critical mufflers
control panel
- Speed and Voltage adjust potentiometers
- PLG 4G/3G/Ethernet
- Annunciator
- Emergency E-Stop
enclosure
- Cat GC enclosure
generator
- Anti-condensation heater
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Oversize and premium generators
electrical options
- 4 Pole Circuit breaker
- Auxiliary contacts
- Padlockable circuit breaker
- Battery charger
- Wet battery
power termination
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
alternator
- Space heater
- AVR
fuel system
- Dual wall 8 hour fuel tank
- Single wall 8 hour fuel tank with spill containment
- Low fuel level shutdown
- Low and high fuel level alarms
- Manual fuel transfer pump
- Fuel transfer system controls
- Dual wall fuel tank base
generator and attachments
- Oversize A Frame generator
- LC frame CIP generator
- Permanent magnet excitation (PMG) generator
- Space heaters
- Ingress protection
- LC frame generator
- A Frame generator - IP21 Protection
- CIP A Frame generator
- Oversize LC frame generator
starting/charging
- Charging alternator
- Jacket water heater
- Battery chargers
- Oversize batteries
- Heavy duty starting system
- 24 Volt battery with rack and cables
air inlet system
- Single stage air filter
- Dual element air filter
certifications
- EU Certificate of Conformance (CE)
- EAC Certification
general
- Automatic transfer switches (ATS)
- EEC Declaration of Conformity
- Integral & sub-base UL listed dual wall fuel tanks
- Single or dual wall sub-base fuel tanks
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- CSA Certification
- UL 2200 package
- The following options are based on regional and product configuration:
- Single or dual wall integral fuel tanks
- EU Certificate of Conformance (CE)
- Sound attenuated, weather protective or high ambient weather protective enclosure
- Narrow, wide or skid base
extended service coverage
- 3, 4, 5 and 10 Years
enclosures
- High ambient sound attenuated enclosures
exhaust system
- Industrial silencer
- 10 dBA Attenuation silencer
- Manifold and turbocharger guards
- End in/end out mufflers - 10, 25 and 35 dBA attenuation
- Flexible exhaust fittings
- 6 and 8 inch elbow kit
- 6 and 8 inch flange GP
- Engine mounted muffler
lube system
- Manual sump pump
mounting system
- Narrow skid base - replaces standard fuel tank base
special test / reports
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
starting / charging system
- 5 Amp single Battery charger
- Battery disconnect switch
- Jacket water heater
Similar Products
DE75AE0 (50 Hz) Generator Set
Maximum Rating:
605 kVA
Minimum Rating:
605 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts
C9 Generator Set
Maximum Rating:
605 kVA
Minimum Rating:
605 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts
DE165E0 (50 Hz) Generator Set
Maximum Rating:
605 kVA
Minimum Rating:
605 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts