Skip to content

DE715 GC Generator Set

At a glance data:

Maximum Rating:
715 kVA
Minimum Rating:
715 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts

Overview

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications

Maximum Rating:
715 kVA
Minimum Rating:
715 kVA
Emissions/Fuel Strategy:
Non Regulated
Voltage:
380 to 415 Volts
Frequency:
50 Hz
Speed:
1500 rpm
Duty Cycle:
Standby

Engine Specifications

Engine Model:
C15 In-line 6, 4-cycle diesel
Bore:
5.4in
Stroke:
6.8in
Displacement:
928in³
Compression Ratio:
16.1:1
Aspiration:
Turbocharged Air-to-Air Aftercooled
Fuel System:
EUI
Governor Type:
Adem™A4

Generator Set Dimensions

Length - Maximum:
131in
Width - Maximum:
60.6in
Height - Maximum:
86.1in
Dry Weight - Genset (maximum):
8613lb

Standard Equipment

engine

  • Cat® C15 Inline 6 cylinder, 4 stroke diesel

air inlet

  • Air cleaner

control panels

  • GCCP 1.1

governor

  • Mechanical governor

alternator

  • A Frame standard alternator

cooling

  • Package mounted radiator

fuel storage

  • Single wall 8 hour fuel tank

cooling system

  • Radiator and cooling fan with guards
  • Fan drive, battery charging alternator drive

fuel

  • Secondary fuel filters
  • Primary fuel filter with integral water separator
  • Fuel priming pump

electrical options

  • 3 Pole Circuit breaker
  • Neutral earth link
  • 24 Volt battery with rack and cables

air inlet system

  • Air cleaner; light duty with disposable element

generator

  • Matched to the performance and output characteristics of Cat engines
  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
  • IP23 Protection

lube system

  • Lubricating oil
  • Oil drain line with valve

mounting system

  • Captive linear vibration isolators
  • Lifting provision and drag points

power termination

  • Busbar

generator and attachments

  • Power center, IP22
  • Segregated low voltage (AC/DC) wiring panel
  • Integrated voltage regulator (IVR)
  • Optional LC Frame generator - IP23 Protection
  • Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

mounting

  • Rubber vibration isolators

governing system

  • Cat electronic governor (ADEM A4).

lube system

  • Oil cooler
  • Oil drain valves

mounting system

  • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

starting/charging

  • 24 Volt battery with rack and cables

general

  • Engine and alternator pre paint, Caterpillar yellow
  • Engine and alternator pre paint, Caterpillar yellow

Optional Equipment

control panel

  • Speed and Voltage adjust potentiometers
  • PLG 4G/3G/Ethernet
  • Annunciator
  • Emergency E-Stop

exhaust

  • Industrial, residential, critical mufflers

enclosure

  • Cat GC enclosure

generator

  • Anti-condensation heater
  • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
  • Oversize and premium generators

electrical options

  • 4 Pole Circuit breaker
  • Auxiliary contacts
  • Padlockable circuit breaker
  • Battery charger
  • Wet battery

power termination

  • Circuit breakers, IEC compliant
  • Circuit breakers, UL listed

alternator

  • Space heater
  • AVR

fuel system

  • Dual wall 8 hour fuel tank
  • Single wall 8 hour fuel tank with spill containment
  • Low fuel level shutdown
  • Low and high fuel level alarms
  • Fuel transfer system controls
  • Manual fuel transfer pump
  • Dual wall fuel tank base

generator and attachments

  • Permanent magnet excitation (PMG) generator
  • Oversize A Frame generator
  • Ingress protection
  • LC frame CIP generator
  • LC frame generator
  • Oversize LC frame generator
  • CIP A Frame generator
  • Space heaters

starting/charging

  • Battery chargers
  • Heavy duty starting system
  • Charging alternator
  • Oversize batteries
  • Jacket water heater

exhaust system

  • Industrial silencer
  • 10 dBA Attenuation silencer
  • Engine mounted muffler
  • Manifold and turbocharger guards
  • End in/end out mufflers - 10, 25 and 35 dBA attenuation
  • 6 and 8 inch elbow kit
  • Flexible exhaust fittings
  • 6 and 8 inch flange GP

air inlet system

  • Single stage air filter
  • Dual element air filter

certifications

  • EU Certificate of Conformance (CE)
  • EAC Certification

general

  • Sound attenuated, weather protective or high ambient weather protective enclosure
  • EU Certificate of Conformance (CE)
  • The following options are based on regional and product configuration:
  • Narrow, wide or skid base
  • Automatic transfer switches (ATS)
  • Single or dual wall sub-base fuel tanks
  • EEC Declaration of Conformity
  • CSA Certification
  • UL 2200 package
  • Integral & sub-base UL listed dual wall fuel tanks
  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
  • Single or dual wall integral fuel tanks

extended service coverage

  • 3, 4, 5 and 10 Years

enclosures

  • High ambient sound attenuated enclosures

lube system

  • Manual sump pump

mounting system

  • Narrow skid base - replaces standard fuel tank base

special test / reports

  • PGS Test report @ 1.0 power factor
  • PGS Test report @ 0.8 power factor

starting / charging system

  • 5 Amp single Battery charger
  • Battery disconnect switch
  • Jacket water heater