Skip to content

C280-6 Generator Set (Medium Speed)

At a glance data:

Maximum Rating:
1820 ekW (60Hz), 2425 kVA (50Hz)
Minimum Rating:
1650 ekW (60Hz), 2200 kVA (50Hz)
Emissions/Fuel Strategy:
IMO Tier 2
Frequency:
50 / 60 Hz

Overview

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications

Maximum Rating:
1820 ekW (60Hz), 2425 kVA (50Hz)
Minimum Rating:
1650 ekW (60Hz), 2200 kVA (50Hz)
Emissions/Fuel Strategy:
IMO Tier 2
Frequency:
50 / 60 Hz
Speed:
900 / 1000 rpm
Duty Cycle:
Prime, Continuous

Engine Specifications

Engine Model:
C280-6, I-6,4-Stroke Water-Cooled Diesel
Bore:
11in
Stroke:
11.8in
Displacement:
111in³
Compression Ratio:
13:01
Aspiration:
TA
Fuel System:
Direct unit injection
Governor Type:
Generator Set Monitoring System (GMS)

Generator Set Dimensions

Length - Maximum:
404in
Width - Maximum:
99.62in
Height - Maximum:
156.6in
Dry Weight - Genset (maximum):
74970lb

Standard Equipment

air inlet system

  • Air inlet shutoff
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
  • Breather, crankcase, top-mounted

cooling system

  • Water temperature regulator
  • Engine coolant water drains
  • Jacket water thermostats

exhaust system

  • Includes adapter, flexible exhaust fitting
  • Dry, gas tight, exhaust manifold
  • 457 mm (18 in) Cat bolt pattern

fuel system

  • Simplex or duplex

generator system

  • Custom generator per generator data sheet completed by dealer

governor system

  • UG Actuator

lube system

  • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
  • Centrifugal oil filters with single shutoff
  • Service side engine mounted on cylinder block inspection covers
  • Crankcase explosion relief valves
  • Oil filler and dipstick
  • Oil pressure regulating valve

mounting system

  • Damper, torsional vibration
  • Engine and generator mounting

starting / charging system

  • Vane type air starter
  • Line group for single point custom connection
  • Air silencer
  • One motor, engine mounted at rear, on left side

general:

  • Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
  • Paint, Caterpillar yellow

Optional Equipment

air inlet system

  • Air inlet adapter
  • Soot filter
  • Heavy duty air cleaner
  • Boost control valve
  • Air cleaner louver assembly
  • Air cleaner
  • Vertical support bracket

cooling system

  • Auxiliary water pump
  • Cooling system aids
  • Heating aids
  • Expansion tank

exhaust system

  • Weld flange and related hardware
  • Flexible exhaust fittings

fuel system

  • Fuel system connections
  • Fuel priming pump
  • Duplex primary fuel strainer

generator system

  • Class F insulation
  • 3 Phase, six Leads, WYE
  • Busbar connections
  • Winding temperature detectors
  • Anti-condensation space heaters

governor system

  • 723 Plus
  • Digital programmers
  • Electronic/actuators
  • Battery backup/power supply
  • 2301 A load share
  • EGB actuator

lube system

  • Oil pan drain valve
  • Lube ANSI adapter (Emergency connection)

mounting system

  • Isolator
  • Spring type vibration isolators
  • Non-vertically restrained
  • Vertically restrained

starting / charging system

  • Pressure reducing valve
  • Compressed air flex hose

general:

  • Custom paint colors