At a glance data:
Gas Standby Rating:
2000 ekW @ 0.8pf
Fuel Type:
Natural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel Strategy:
U.S. EPA Stationary Non-Emergency Certified
Frequency:
60 Hz
Overview
Generator Set Specifications
Gas Standby Rating:
2000 ekW @ 0.8pf
Fuel Type:
Natural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel Strategy:
U.S. EPA Stationary Non-Emergency Certified
Frequency:
60 Hz
RPM:
1800 rpm
Engine Specifications
Engine Model:
G3520
Displacement:
5956in³
Aspiration:
TA
Bore:
6.7in
Stroke:
8.5in
Generator Set Specifications
Compression Ratio:
11.5
Generator Set Dimensions
Length:
336in
Width:
94in
Height:
128in
Weight:
48500lb
Standard Equipment
air inlet
- Two-element single-stage air cleaner with enclosure and service indicator
control panel
- Cat ECS 100
cooling
- Jacket water and SCAC engine-driven pumps
- Jacket water and SCAC thermostats
exhaust
- Dry exhaust manifolds, insulated and shielded
- Cat-flanged face outlet on turbocharger
- Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
fuel system
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Engine-installed electronic control valve
- Gas pressure regulator
- Throttle plate, 24V DC actuator, controlled by GECM
- 24V DC energized-to-run (ETR) gas shutoff valve
general
- Parts book
- Paint- Caterpillar Yellow with high gloss black rails and radiator
- Operation and maintenance manuals
- Crankshaft vibration damper and guard
- RH Service
generator
- Permanent Magnet Excitiation
- Integrated voltage regulator (IVR)
- SR5
- Winding temperature detectors
- Anti-condensation space heater
- NEMA Class H insulation
starting/charging
- 24V starting motors
- Battery with cables and rack (shipped loose)
- Jacket water heater
- Electric Starter
governing system
- ADEM A4
ignition system
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
Optional Equipment
air inlet
- Air cleaner with precleaner
control panel
- EMCP 4.4
- Local alarm module
- Engine failure relay
- Remote annunciator
- Remote PC monitoring
- Local PC monitoring
circuit breakers
- 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
- 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
- S LSI, G LSIG, P LSIG-P, 4th Digit Type
- Frame mounting
- 3-pole (IEC 947-2 rated)
- 2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
cooling
- Package mounted radiator
- Coolant level drain line with valves, fan with guard
exhaust
- 18, 25 dBA Attenuation
- 305mm (12 in) spark arresting muffler
- 305 mm (12in.) elbow
- 305 mm (12 in.) flange
- 305 mm (12 in.) muffler
fuel system
- 3, 0-100 kPag, 4-20mA gas train pressure sensors
general
- Digital diagnostic tool
generator
- Bearing temperature detectors
- Generator air filter
- Cable access box
- European bus bars
- Low voltage extension box
starting/charging
- 20A, 24VDC battery charger
- 45A, 24V charging alternator (requires engine driven pumps)
grid code compliance
- 60 Hz: USA
Similar Products
G3516 1500kW Gas Generator Set
Gas Standby Rating:
2000 ekW @ 0.8pf
Fuel Type:
Natural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel Strategy:
U.S. EPA Stationary Non-Emergency Certified
Frequency:
60 Hz
DG175-2 (3 phase)
Gas Standby Rating:
2000 ekW @ 0.8pf
Fuel Type:
Natural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel Strategy:
U.S. EPA Stationary Non-Emergency Certified
Frequency:
60 Hz
G3412 Gas Generator Set
Gas Standby Rating:
2000 ekW @ 0.8pf
Fuel Type:
Natural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel Strategy:
U.S. EPA Stationary Non-Emergency Certified
Frequency:
60 Hz