Skip to content

G3412 Gas Generator Set

At a glance data:

Maximum Standby Rating:
500 ekW @0.8pf
Fuel Type:
Natural Gas
Emissions/Fuel Strategy:
U.S. EPA Certified for Emergency Only Stationary Genset
Frequency:
60 Hz

Overview

Generator Set Specifications

Maximum Standby Rating:
500 ekW @0.8pf
Fuel Type:
Natural Gas
Emissions/Fuel Strategy:
U.S. EPA Certified for Emergency Only Stationary Genset
Frequency:
60 Hz
RPM:
1800 rpm

Engine Specifications

Engine Model:
G3412
Displacement:
1649in³
Aspiration:
NA
Bore:
5.4in
Stroke:
6in

Generator Set Dimensions

Length:
165in
Width:
85.25in
Height:
86in
Dry Weight - Genset:
14700lb

Standard Equipment

air inlet

  • Two-element single-stage air cleaner with enclosure and service indicator
  • Dual air cleaners, 1 per side, with service indicator

control panel

  • EMCP 4.3

cooling

  • Package mounted radiator
  • LH or RG connections when radiator is not selected
  • Engine driven pumps for jacket water and separate circuit aftercooler
  • Jacket water and SCAC thermostats

fuel

  • Pipeline Natural Gas: 800-1000 BTU/scf and 70-100 Methane Number
  • Gas Train: NFPA37 and CSA B149.3

exhaust

  • Dry exhaust manifolds, insulated and shielded

fuel system

  • Engine-installed electronic control valve
  • Gas pressure regulator
  • 24V DC energized-to-run (ETR) gas shutoff valve

general

  • Paint- Caterpillar Yellow with gloss black rails and radiators
  • Operation and maintenance manuals
  • RH Service
  • Parts book
  • Crankshaft vibration damper and guard

lubrication

  • Cartridge style oil filter
  • Gear type lube oil pump

generator

  • Caterpillar's Digital Voltage Regulator (CDVR) including reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, and a min/max exciter
  • Anti-condensation space heater
  • Permanent Magnet Excitiation
  • Winding temperature detectors

governing system

  • ADEM A4

ignition system

  • Electronic Ignition System (controlled by ADEM A4)
  • Individual Cylinder Detonation Sensitive Timing (DST)

starting/charging

  • Electric Starter
  • 24V DC starting motors

Optional Equipment

air inlet

  • Air cleaner with precleaner

circuit breakers

  • S LSI
  • Frame mounting
  • Right, left, rear mounted

control panel

  • Local alarm module
  • Local PC monitoring
  • Remote PC monitoring
  • Remote annunciator

cooling

  • Inlet/Outlet connections
  • Coolant level drain line with valves, fan with guard

exhaust

  • Flexible fittings
  • 15, 25 dBA Attenuation

general

  • Digital diagnostic tool
  • Tool set
  • US AID emblem

generator

  • Cable access box
  • Bearing temperature detectors

starting/charging

  • Battery with cables and rack (shipped loose)
  • 10A, 24VDC battery charger
  • Jacket water heater