At a glance data:
Required Hydraulics:
High Flow XPS
Cutting Wheel Diameter - With Teeth:
21.5in
Cutting Depth - Below Ground:
20.5in
Cutting Head Extension:
11in
Overview
Cat® Stump Grinders are designed to economically remove stumps in residential, commercial and agricultural settings. They offer increased production over tow-behind grinders in situations where multiple stump removal is required. The right balance of cutting wheel speed and torque makes quick work of most tree varieties.
Required Hydraulics:
High Flow XPS
Cutting Wheel Diameter - With Teeth:
21.5in
Cutting Depth - Below Ground:
20.5in
Cutting Head Extension:
11in
Cutting Head Speed at Maximum Flow:
1230 rpm
Cutting Head Swing Range:
70 degrees
Cutting Height - Above Ground:
18.5in
Cutting Wheel Width - With Teeth:
3.3in
Cutting Width - Full Swing Range:
60in
Drive Method:
Gerotor Motor- Direct
Drive Shaft Torque at Maximum Pressure:
345.9lb/ft
Motor Displacement:
6.1in³
Optimal Hydraulic Pressure:
207-310 bar (3000-4500 psi)
Overall Height:
32in
Overall Length:
68.4in
Overall Width:
46.3in
Optimal Hydraulic Flow:
95-125 L/min (25-33 gpm)
Weight:
881.8lb
Number of Carbide Teeth per Cutting Wheel:
32
Standard Equipment
Optional Equipment
Similar Products
SG36 Stump Grinder
Required Hydraulics:
High Flow XPS
Cutting Wheel Diameter - With Teeth:
21.5in
Cutting Depth - Below Ground:
20.5in
Cutting Head Extension:
11in
SG16 Stump Grinder
Required Hydraulics:
High Flow XPS
Cutting Wheel Diameter - With Teeth:
21.5in
Cutting Depth - Below Ground:
20.5in
Cutting Head Extension:
11in