At a glance data:
Maximum Power:
66hp
Maximum Torque:
153lb-ft @ 1800 rpm
Rated Speed:
2200-3000 rpm
Minimum Power:
41.6hp
Overview
The Cat® C2.2 Industrial Diesel Engine is offered in ratings ranging from 31-49.3 bkW (41.6-66.1 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim equivalent) emission standards. Industries and applications powered by C2.2 engines include: Agriculture, Aerial Lifts, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, General Industrial, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Mobile Sweepers, Paving Equipment, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
Power Rating
Maximum Power:
66hp
Maximum Torque:
153lb-ft @ 1800 rpm
Rated Speed:
2200-3000 rpm
Minimum Power:
41.6hp
Emission Standards
Emissions:
U.S. EPA Tier 4 Interim Equivalent
General
Engine Configuration:
Inline 4, 4-Stroke-Cycle Diesel
Bore:
3.3in
Stroke:
3.9in
Displacement:
135in³
Compression Ratio:
23.3:1
Aspiration:
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System:
Indirect Injection
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
-
Engine Dimensions - Approximate
Length:
26in
Width:
19.3in
Height:
27.5in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
427.7lb
Standard Equipment
air inlet system
- Inlet manifold with choice of inlets.
control system
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
cooling system
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
flywheels and flywheel housing
- SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
- Choice of SAE No. 4 or standard backplate flywheel housing
fuel system
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
lube system
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
general
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
Similar Products
Cat ® C0.5 Diesel Engine
Maximum Power:
66hp
Maximum Torque:
153lb-ft @ 1800 rpm
Rated Speed:
2200-3000 rpm
Minimum Power:
41.6hp
Cat ® 3512 Industrial Diesel Engine
Maximum Power:
66hp
Maximum Torque:
153lb-ft @ 1800 rpm
Rated Speed:
2200-3000 rpm
Minimum Power:
41.6hp
Cat ® 3512C Industrial Diesel Engine
Maximum Power:
66hp
Maximum Torque:
153lb-ft @ 1800 rpm
Rated Speed:
2200-3000 rpm
Minimum Power:
41.6hp