At a glance data:
Maximum Power:
595hp
Maximum Torque:
2004lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
440hp
Overview
The Cat® C15 Industrial Diesel Engine is offered in ratings ranging from 328-444 bkW (440-595 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C15 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
Maximum Power:
595hp
Maximum Torque:
2004lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
440hp
Emission Standards
Emissions:
China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
General
Engine Configuration:
Inline 6, 4-Stroke-Cycle Diesel
Bore:
5.4in
Stroke:
6.8in
Displacement:
927.6in³
Compression Ratio:
18.0:1
Aspiration:
Turbocharged Aftercooled (TA)
Combustion System:
Direct Injection
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
-
Engine Dimensions - Approximate
Length:
54.2in
Width:
36.2in
Height:
48.3in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
3239lb
Standard Equipment
air inlet system
- Turbocharged
- Air-to-Air Aftercooled
control system
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
cooling system
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
exhaust system
- Exhaust manifold, dry
- Optional exhaust outlet
flywheels and flywheel housing
- SAE No. 1 flywheel housing
fuel system
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel filter, tertiary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
lube system
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
general
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
Similar Products
Cat ® C0.5 Diesel Engine
Maximum Power:
595hp
Maximum Torque:
2004lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
440hp
Cat ® 3512 Industrial Diesel Engine
Maximum Power:
595hp
Maximum Torque:
2004lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
440hp
Cat ® 3512C Industrial Diesel Engine
Maximum Power:
595hp
Maximum Torque:
2004lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
440hp