At a glance data:
Maximum Power:
1350hp
Maximum Torque:
4548lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
950hp
Overview
The Cat® C32 Industrial Diesel Engine is offered in ratings ranging from 708-1007 bkW (950-1350 bhp) @ 1800-2100 rpm. These ratings meet U.S. EPA Tier 2 equivalent emission standards. Industries and applications powered by these high power engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
Maximum Power:
1350hp
Maximum Torque:
4548lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
950hp
Emission Standards
Emissions:
U.S. EPA Tier 2 Equivalent
General
Engine Configuration:
V-12, 4-Stroke-Cycle Diesel
Bore:
5.7in
Stroke:
6.4in
Displacement:
1958.9in³
Compression Ratio:
16.5:1
Aspiration:
Turbocharged Aftercooled (TA)
Combustion System:
Direct Injection
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
-
Engine Dimensions - Approximate
Length:
75.5in
Width:
58.2in
Height:
51.9in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
6495lb
Standard Equipment
air inlet system
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
control system
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
cooling system
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
exhaust system
- Exhaust manifold, dry
- Optional exhaust outlet
flywheels and flywheel housing
- SAE No. 1 flywheel housing
fuel system
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
lube system
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
general
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
Similar Products
Cat ® C0.5 Diesel Engine
Maximum Power:
1350hp
Maximum Torque:
4548lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
950hp
Cat ® 3512 Industrial Diesel Engine
Maximum Power:
1350hp
Maximum Torque:
4548lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
950hp
Cat ® 3512C Industrial Diesel Engine
Maximum Power:
1350hp
Maximum Torque:
4548lb-ft @ 1400 rpm
Rated Speed:
1800-2100 rpm
Minimum Power:
950hp