At a glance data:
Maximum Power:
482hp
Rated Speed:
1750-2300 rpm
Minimum Power:
292hp
Emissions:
Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
Overview
The Cat® 3406C Industrial Diesel Fire Pump Engine is offered in ratings ranging from 218-359 kW (292-482 hp) @ 1750-2300 rpm. These ratings are non-certified and available for global non-regulated areas. They are FM Approved and UL Listed. Additional 3406C ratings with or without radiators are available, but not FM approved or UL listed. Starting on demand is a must for a fire pump engine - always. Cat® fire pump engines have a reputation for reliable starts and long efficient service.
Power Rating
Maximum Power:
482hp
Rated Speed:
1750-2300 rpm
Minimum Power:
292hp
Emission Standards
Emissions:
Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
General
Engine Configuration:
Inline 6, 4-Stroke-Cycle Diesel
Bore:
5.4in
Stroke:
6.5in
Displacement:
893in³
Compression Ratio:
14.5:1
Aspiration:
Turbocharged Aftercooled
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
-
Engine Dimensions - Approximate
Length:
65.4in
Height:
52.6in
Standard Equipment
air inlet system
- Dry or watercooled manifold and turbocharger
charging system
- Charging Alternator, 24 volt, 35 amp
control system
- Hydra-mechanical governor
cooling system
- Thermostats and housing
- Jacket water pump, gear driven, centrifugal
- Heat exchanger
- Expansion tank
- FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
- Optional Radiator, not UL listed or FM approved
exhaust system
- Exhaust manifold, water-cooled (wet) or dry
- Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
flywheels and flywheel housing
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
fuel system
- Fuel filter, LH
- Fuel transfer pump
- Primary fuel filter / water separator
instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Service meter
lube system
- Crankcase breather
- Oil cooler
- Lube oil filter
- Oil filler in valve cover and dipstick, both RH
- Rear sump oil pan
- Oil filler in valve cover
- Dipstick
mounting system
- Supports
power take-offs
- Flywheel stub shaft
protection system
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
general
- Vibration damper and guard
- Lifting eyes
- Paint - fire pump red, optional radiator painted black
Optional Equipment
Similar Products
Cat® 3508 Fire Pump
Maximum Power:
482hp
Rated Speed:
1750-2300 rpm
Minimum Power:
292hp
Emissions:
Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
Cat® 3516 Fire Pump
Maximum Power:
482hp
Rated Speed:
1750-2300 rpm
Minimum Power:
292hp
Emissions:
Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
Cat ® C18 Diesel Fire Pump
Maximum Power:
482hp
Rated Speed:
1750-2300 rpm
Minimum Power:
292hp
Emissions:
Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed