At a glance data:
Maximum Power:
1985hp
Rated Speed:
1460-1750 rpm
Minimum Power:
1900hp
Emissions:
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
Overview
Cat® 3516 Industrial Diesel Fire Pump Engines, with ratings: 1417-1480 kW (1900-1985 hp) @ 1460-1750 rpm, are non-certified, not FM Approved and not UL Listed. They are available for global non-regulated areas. Starting on demand is a must for a fire pump engine - always. Cat® fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.
Power Rating
Maximum Power:
1985hp
Rated Speed:
1460-1750 rpm
Minimum Power:
1900hp
Emission Standards
Emissions:
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
General
Engine Configuration:
V-16, 4-Stroke-Cycle Diesel
Bore:
6.7in
Stroke:
7.5in
Displacement:
4210in³
Compression Ratio:
13.0:1
Aspiration:
Turbocharged Aftercooled (TA)
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
-
Engine Dimensions - Approximate
Length:
146.9in
Height:
74.9in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
17800lb
Standard Equipment
air inlet system
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
control system
- Charging alternator 24 volt, 35 amp
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
cooling system
- Thermostats and housing
- Jacket water pump, centrifugal
exhaust system
- Exhaust manifold, dry
flywheels and flywheel housing
- SAE No. 0 flywheel
- 151 flywheel teeth
- SAE No. 0 flywheel housing
- SAE standard rotation
fuel system
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
instrumentation
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
lube system
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
- Fumes disposal (not installed)
mounting system
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
- Included on selected top level engines
power take off
- Accessory drive, upper RH
- Front housing, single sided
protection system
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
starting system
- Starting switch
general
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
Similar Products
Cat® 3508 Fire Pump
Maximum Power:
1985hp
Rated Speed:
1460-1750 rpm
Minimum Power:
1900hp
Emissions:
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
Cat® 3516 Fire Pump
Maximum Power:
1985hp
Rated Speed:
1460-1750 rpm
Minimum Power:
1900hp
Emissions:
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
Cat ® C18 Diesel Fire Pump
Maximum Power:
1985hp
Rated Speed:
1460-1750 rpm
Minimum Power:
1900hp
Emissions:
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed