At a glance data:
Dipper Payload:
120t
Dipper Capacity:
30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified):
120t
Note:
Dependent on application and material density
Overview
Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 with Rope Crowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 with Rope Crowd is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.
Dimensions
Dipper Payload:
120t
Dipper Capacity:
30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified):
120t
Note:
Dependent on application and material density
Weights
Working Weight - With Dipper and Standard Links:
3056000lb
Ballast - Furnished By Customer:
667150lb
Note (1):
These weights will vary slightly depending upon dipper and optional equipment selection
Note (2):
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
Main Structures
Upper Works Overall Width - Including Standard Walkways:
41.9ft
Swing:
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Planetary Propel:
Dual-motor independent drive
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads:
36 m2 (380 kPa); 386 ft2 (55 psi)
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard:
36ft
Hoist:
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads:
38ft
Ground Bearing Pressure - Note:
Ground bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads:
47 m2 (297 kPa); 501 ft2 (43 psi)
Lube System
Type:
Automatic, single-line system for open gear lubricant and grease
Components (1):
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Electrical
Power Requirements - Voltage:
3 phase, 50/60 Hz, 7,200V
Power Requirements - 60 Hz:
7,200V, 13,800V
Power Requirements - 50 Hz:
6,000V, 6,600V, 7,200V, 11,000V
System Voltage - Nominal:
50/60 Hz, 7,200V
Drive:
IGBT Acutrol drive system
Power Requirements - Peak power:
3737 kW
Power Requirements - Average Power Demand:
934-1308 kW
Power Requirements - Note:
Other voltage options available to suit customer requirements
Front End
Rope Data - Hoist - No.:
2
Rope Data - Dipper Trip - No.:
1
Rope Data - Crowd - Diameter:
2.5in
Rope Data - Crowd - No.:
1
Rope Data - Hoist - Diameter:
2.75in
Rope Data - Boom Suspension - Diameter:
3.25in
Rope Data - Dipper Trip - Diameter:
0.75in
Rope Data - Note:
High impact ropes available as an option
Rope Data - Boom Suspension - No.:
4
Rope Data - Retract - No.:
1
Rope Data - Retract - Diameter:
2.5in
Type:
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd (1):
Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Crowd (2):
(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Dimensions - Working Ranges
Dipper Capacities:
30.6-62.7 m3 (40-82 yd3)
Dipper Payload:
120ton (US)
Maximum Dumping Height:
28.9ft
Operating Weight:
3056000lb
Dimensions (Approximate) - Optimal Working Ranges*
Radius of Level Floor:
56.1ft
Revolving Frame Tail Swing Radius:
30.5ft
Cutting Height - Maximum:
53.5ft
Cutting Radius - Maximum:
80ft
Dumping Height - With Clearance to Open Dipper Door:
28.9ft
Note (1):
Optimal working ranges based on loading a Cat 797F truck.
Note (2):
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
Lube System
Components (2):
External FastFil from lower level
Standard Equipment
Optional Equipment
Similar Products
7495 Electric Rope Shovel
Dipper Payload:
120t
Dipper Capacity:
30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified):
120t
Note:
Dependent on application and material density
7495 Electric Rope Shovel
Dipper Payload:
120t
Dipper Capacity:
30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified):
120t
Note:
Dependent on application and material density
7495 HF Electric Rope Shovel
Dipper Payload:
120t
Dipper Capacity:
30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified):
120t
Note:
Dependent on application and material density