Skip to content

3616 Generator Set (Medium Speed)

At a glance data:

Maximum Rating:
7520 kVA
Minimum Rating:
4700 kVA
Emissions/Fuel Strategy:
Low Fuel Consumption
Frequency:
50 Hz

Overview

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications

Maximum Rating:
7520 kVA
Minimum Rating:
4700 kVA
Emissions/Fuel Strategy:
Low Fuel Consumption
Frequency:
50 Hz
Speed:
720 & 1000 rpm
Duty Cycle:
Standby, Prime, Continuous

Engine Specifications

Engine Model:
3616 V-16, 4-Stroke Water-Cooled Diesel
Bore:
11in
Stroke:
11.8in
Displacement:
18032in³
Compression Ratio:
13:01
Aspiration:
TA
Fuel System:
Direct unit injection
Governor Type:
Generator Set Monitoring System (GMS)

Generator Set Dimensions

Length - Maximum:
404in
Width - Maximum:
99.62in
Height - Maximum:
156.6in
Dry Weight - Genset (maximum):
141840lb

Standard Equipment

air inlet system

  • Turbocharger, watercooled, engine oil lubricated
  • Air inlet shutoff
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Air cleaner
  • Breather, crankcase, top-mounted

cooling system

  • Front mounted turbos
  • Three-bundle oil cooler
  • Engine coolant water drains
  • Water temperature regulator
  • Jacket water thermostats

exhaust system

  • 457 mm (18 in) Cat bolt pattern
  • Dry, gas tight, exhaust manifold
  • Includes adapter, flexible exhaust fitting

fuel system

  • Simplex or duplex

generator system

  • Custom generator per generator data sheet completed by Dealer

governor system

  • UG Actuator

lube system

  • Oil pressure regulating valve
  • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
  • Crankcase explosion relief valves
  • Oil filler and dipstick
  • Service side engine mounted on cylinder block inspection covers
  • Centrifugal oil filters with single shutoff

mounting system

  • Engine and generator mounting
  • Damper, torsional vibration

starting / charging system

  • Line group for single point custom connection
  • Two motors, engine mounted at rear, on left side
  • Vane type air starter
  • Air silencer

general:

  • Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
  • Paint, Caterpillar yellow

Optional Equipment

air inlet system

  • Soot filter
  • Air inlet adapter
  • Heavy duty air cleaner
  • Vertical support bracket
  • Air cleaner louver assembly
  • Boost control valve

cooling system

  • Expansion tank
  • Auxiliary water pump
  • Heating aids
  • Cooling system aids
  • Heat exchanger for single circuit

exhaust system

  • Weld flange and related hardware
  • Flexible exhaust fittings

fuel system

  • Duplex primary fuel strainer
  • Fuel priming pump
  • Fuel system connections

generator system

  • Busbar connections
  • Anti-condensation space heaters
  • Class F insulation
  • 3 Phase, six Leads, WYE
  • Winding temperature detectors

governor system

  • 230 UA
  • Battery backup/power supply
  • Digital programmers
  • EGB actuator
  • Electronic/actuators
  • 723 Plus

lube system

  • Lube ANSI adapter (Emergency connection)
  • Oil pan drain valve

mounting system

  • Spring type vibration isolators
  • Non-vertically restrained
  • Vertically restrained
  • Isolator

starting / charging system

  • Turbine type air starters
  • Redundant air starters
  • Pressure reducing valve
  • Compressed air flex hose

general:

  • Custom paint colors