CX31-P600 Well Service Transmission

new - Products
CX31-P600 Well Service Transmission

At a glance data:

Gross Input Power:

600.0BHP

Gross Peak Input Torque:

2025.0ft-lb

Rated Input Speed:

2100.0r/min

Maximum Turbine Torque:

2600.0ft-lb

Print CX31 SHOW FLYER CX31-P600 Transmission Spec Sheet

Overview

Your operation depends on the power driving it. And your transmission is as crucial to your power solution as the engine. Cat transmissions are proven in the oil and gas industry and widely known for their exceptional power, leading durability, ease of operation, and shifting options.Ideal applications for Cat CX31-P600 transmissions include workover rigs, kill mud pumps, coil tubing pump support, nitrogen units, acidizing units, and cementing units. CX31-P600 transmissions are optimized for use with C9 ACERT, C11 ACERT, C13 ACERT, C15 ACERT, and C18 ACERT engines (A and B ratings).Cat CX31-P600 oilfield transmission. Gross input power: 447 bkW (600bhp). Configurations available include integral pump drives, integral drop box, and side power take-off.

Transmission Specifications

Gross Input Power:

600.0BHP

Gross Peak Input Torque:

2025.0ft-lb

Rated Input Speed:

2100.0r/min

Maximum Turbine Torque:

2600.0ft-lb

Maximum Input Speed:

2500r/min

Retarder Rating:

535.0hp

Retarder Rating Speed:

2400.0r/min

Electrical System:

24.0V

Gear Type:

Planetary Spur

Gears:

6F/1R

1F Gear Ratio:

4.40

2F Gear Ratio:

2.33

3F Gear Ratio:

1.53

4F Gear Ratio:

1.00

5F Gear Ratio:

0.72

6F Gear Ratio:

0.61

1R Gear Ratio:

-3.97

Overall Gear Ration:

7/21

Standard Equipment

cat engines for optimized power train

C9 ACERT, C11 ACERT, C13 ACERT, C15 ACERT, C18 ACERT (A and B ratings)

transmission rotation

Input rotation — counterclockwiseOutput rotation — counterclockwise(as viewed from rear)

torque converter

Lock-up clutch, torque converter drive in all gears integral to transmission
Stall torque ratio

clutches

Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)

installation connections

2 oil cooler lines
1 electrical connector

oil system

Cat Transmission/Drive Train Oil-4 (TDTO) sump oil temperatures
Maximum converter outlet oil temperature — 250°F (121°C)
Hydraulic fill capacity — 6.5 gal (25 L) subject to cooler size, lines, and installation — initial fill may be greater
Direct mount filter