C18 Marine Generator Set
- new - Products
- C18 Marine Generator Set
At a glance data:
Minimum Rating:
260 ekW (325 kVA)
Maximum Rating:
565 ekW (706 kVA)
Frequency:
50 hz
Speed:
50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Overview
The C18 is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.
Generator Set Specifications
Minimum Rating:
260 ekW (325 kVA)
Maximum Rating:
565 ekW (706 kVA)
Frequency:
50 hz
Speed:
50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Engine Specifications
Configuration:
In-line 6, 4-Stroke-Cycle Diesel
Aspiration:
Turbocharged - aftercooled
Bore:
5.7in
Stroke:
7.2in
Fuel System:
MEUI
Generator Set Configurations
Emissions:
EPA Tier 3, IMO II, EU IW
Generator Set Dimensions - Radiator Cooled
Height:
94.8in
Length:
55.6in
Generator Set Dimensions - Keel and Hex Cooled
Length:
119.6in
Height:
64.9in
Generator Specifications
Excitation:
SRMP
Insulation:
Class H
IP Rating:
IP23 (standard), IP 44 (optional)
Voltage Regulator:
CDVR (Digital Voltage)
Generator Set Dimensions - Radiator Cooled
Width:
66.9in
Generator Set Dimensions - Keel and Hex Cooled
Width:
55.6in
Generator Set Dimensions - Radiator Cooled
Weight - Approximate:
13396lb
Generator Set Dimensions - Keel and Hex Cooled
Weight - Approximate:
9747lb
Standard Equipment
air inlet system
- Separate circuit after-cooled (SCAC)
- Heavy-duty inlet air filter
cooling system
- SCAC pump, gear driven, for HEX cooled engines only
- Jacket water pump, gear driven
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
exhaust system
- Water-cooled exhaust manifold & turbocharger
- Round flanged exhaust outlet
fuel system
- Hybrid fuel lines
- MEUI™ fuel system
- Fuel filter, front service
- Fuel transfer and priming pumps
lube system
- Center sump oil pan, deep
- Front and top service oil filler locations
- Front service dipstick
mounting system
- Vibration Isolators
- Formed C-channel rails
control system
- Electronic fuel/air ratio control
- SRMP permanent magnet 12-lead generator
- Digital voltage regulator
- Class H insulation, Class F temperature rise, IP23 protection
Optional Equipment
exhaust system
- Dry Elbows
- Water-Cooled Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler, Spark Arresting
- Fumes disposal (closed system)
air inlet system
- Air Inlet Adapter
charging system
- Battery Chargers 10 amp
- Battery sets: 24V 950-1300 CCA
- Charging alternator 24V 105 amp
control system
- Caterpillar alarm and protection
- EMCP 4.2 control panel
- MGCP III B control panel
fuel system
- Duplex fuel filter – front service
- Fuel cooler
- Primary fuel/water separator
instrumentation
- Generator service side - LH, RH
- Generator terminal box extension
- Load sharing module (option for type approved module)
lube system
- Spare pump kits
- Duplex oil filter – front service
- Manual sump pump
mounting system
- Vibration Isolators
protection system
- Generator protection - IP44
starting system
- Starting motors - electric and/or air
- Jacket water heaters
Similar Products
Cat C32 ACERT Generator Set (IMO II)
Minimum Rating:
260 ekW (325 kVA)
Maximum Rating:
565 ekW (706 kVA)
Frequency:
50 hz
Speed:
50 Hz - 1500 rpm, 60 Hz - 1800 rpm
C1.5 Marine Generator Set Engine
Minimum Rating:
260 ekW (325 kVA)
Maximum Rating:
565 ekW (706 kVA)
Frequency:
50 hz
Speed:
50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Cat C280-12 Marine Generator Set
Minimum Rating:
260 ekW (325 kVA)
Maximum Rating:
565 ekW (706 kVA)
Frequency:
50 hz
Speed:
50 Hz - 1500 rpm, 60 Hz - 1800 rpm