At a glance data:
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
Overview
The 3512C (HD) offshore engine for well stimulation operations was specifically developed to operate in harsh environments offshore while meeting the highest standards in performance, durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3512C (HD) offshore engines, with ratings: 1678-1864 bkW (2250-2500 bhp) @ 1900 rpm meet IMO Tier II and U.S. EPA Marine Tier 2 emission standards.
General Specifications
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
Flywheel and Flywheel Housing:
SAE No. 0
Flywheel Teeth:
151
Stroke:
8.5in
Bore:
6.7in
Emissions
Emissions:
IMO Tier II and EPA Marine Tier 2
Dimensions
Length:
113.8in
Width:
64.2in
Height:
86.1in
Weight:
14145.0lb
Standard Equipment
air inlet system
- Heavy-duty air cleaners (dual element/service indicator)
- Four center-mounted turbochargers
control system
- Cat® ADEM A3 ECU — LH
- With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)
cooling system
- Separate Circuit SCAC system
- Torque converter connections
- Thermostats and housing, jacket and separate circuit water pump, gear-driven centrifugal
exhaust system
- Land well service engine
- Exhaust manifold, dry, slip joint with stainless steel wire seal
- Four turbochargers with watercooled bearings (center mounted)
- Exhaust outlet, dual 203 mm (8 in) round flange
flywheel and flywheel housings
- Flywheel, SAE No. 0, 151 teeth
- Flywheel housing, SAE No. 0
fuel system
- Primary fuel filter
- Fuel priming pump
- Fuel filter — RH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
instrumentation
- No standard instrumentation
- Optional, remote instrumentation available
- Service meter
lube system
- Crankcase breather — top mounted
- Oil cooler
- Oil filler and dipstick — LH
- Oil pump
- Oil filter — RH spin-on type
- Rear sump oil pan — 250-hour change interval
- Oil pan drain valve — 1" NPT female connection
- Fumes disposal
- Scavenger pump
mounting system
- Trunion front support
power take-offs
- Accessory drive — lower LH
- Front housing — two-sided
protection system
- ADEM A3 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40-pin customer interface connection
- Dual air inlet shutoff
- Oil pressure monitor
general
- General
- Vibration damper and guard
- Lifting eyes
Optional Equipment
charging system
- Charging alternators
control system
- Local speed throttle control
- Throttle position sensors
- Governor conversion
cooling system
- Coolant regulator conversion
- Water level switch gauge
- Coolant level sensors and coolant conditioner
exhaust system
- Flexible exhaust fitting
- Elbows, flange, exhaust adapters
- Manifold and mufflers
fuel systems
- Flexible fuel lines
- Water/fuel separator
- Fuel level switch
instrumentation
- Remote panel display and remote cylinder temperature display
- Gauges and instrument panels
lube system
- Oil pans and filters
- Deep sump oil pan and front sump pan
power take-offs
- Front crankshaft adapter
- Flywheel stub shaft
protection system
- Sensors
- Shutoff controls
starting system
- Air starting motors
- Electric starting motors
- Hydraulic starter
- Ether starting aids
- Battery sets — 24V
- Battery cable and battery rack
3512E Tier 4 Final Well Service Engine
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
3512C (HD) Well Stimulation Engine
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
3516C (HD) Well Stimulation Engine
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
Similar Products
C9.3 ACERT™ Tier 4 Final Engine
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
3516C (HD) Well Stimulation Engine
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled
C15 ACERT™ Tier 4 Final Engine
Maximum Rating:
2500.0BHP
Displacement:
58.9in³
Minimum Rating:
2150.0BHP
Aspiration:
Turbocharged-Aftercooled