C15 ACERT™ Tier 4 Final Engine

new - Products
C15 ACERT™ Tier 4 Final Engine

At a glance data:

Maximum Rating:

580.0BHP

Displacement:

927.6in³

Minimum Rating:

475.0BHP

Aspiration:

Turbocharged-Aftercooled

C15 ACERT™ Tier 4 Final Petroleum Engine Well Servicing Engines

Print C15 ACERT T4F Engine Spec Sheet

Overview

Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements. This is an ideal engine for applications that require compliance with the highest emission standards in well service applications such as workover rigs, pump skids, nitrogen units, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C13 ACERT engines with ratings: 354-433 bkW (475-580 bhp) @ 1800-2100 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.

General Specifications

Maximum Rating:

580.0BHP

Displacement:

927.6in³

Minimum Rating:

475.0BHP

Aspiration:

Turbocharged-Aftercooled

Flywheel and Flywheel Housing:

SAE 0 or 1

Flywheel Teeth:

136 (SAE 0), 113 (SAE 1)

Stroke:

6.73in

Bore:

5.39in

Emissions

Emissions:

EPA Tier 4 Final and EU Stage IV

Dimensions

Length:

56.6in

Width:

38.1in

Height:

49.1in

Weight:

3395.5lb

Standard Equipment

control system

Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)

cooling system

Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available through your dealer to ensure equipment reliability. Available cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.

exhaust system

Mid-mount turbocharged system with front and rear exhaust configurations

flywheels and flywheel housing

SAE No. 0 and SAE No. 1 flywheel housings; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments

fuel system

MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming

lube system

Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)