At a glance data:
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
Overview
Cat C7 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C7 ACERT engines to deliver excellent performance with low operating costs and emissions. Applications powered by C7 ACERT engines include pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. The C7 ACERT engines, with ratings: 168-224 bkW (225-300 bhp) @ 1800-2200 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
General Specifications
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
Aspiration:
Turbocharged-Aftercooled
Flywheel and Flywheel Housing:
SAE 1, 2, or 3
Flywheel Teeth:
156 (SAE 1), 134 (SAE 2), 126 (SAE 3)
Rotation from Flywheel End:
Counterclockwise
Stroke:
5.0in
Bore:
4.3in
Emissions
Emissions:
EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Dimensions
Length:
41.4in
Width:
29.9in
Height:
40.6in
Weight:
1386.0lb
Capacity for Liquids
Lube Oil System - Refill:
4.8gal (US)
Standard Equipment
air inlet system
- Turbocharger, air to air aftercooled
- Air inlet, LH side facing front 79.0 mm (3.11 in) connection
control system
- Electronic governing, PTO speed control
- Programmable rating
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Programmable monitoring system (engine speeds, temperature, pressure)
- J1939 broadcast (diagnostic and engine status)
- Automatic variable timing, electronic
- All engines shipped at max rated rpm
cooling system
- Thermostats and housing, vertical outlet
- Jacket water pump — belt-driven, centrifugal
- Water pump, inlet RH front vertical inlet (pointing down)
exhaust system
- Exhaust manifold — dry
- Front turbo exhaust
fuel system
- Hydraulic Electronic Unit injection (HEUI)
- Fuel filter — secondary, LH front (2-micron high performance)
- Fuel transfer pump — LH front
- Fuel priming pump — LH front
general
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Electronic installation kit (connectors, pins, sockets)
lube system
- Crankcase breather, LH side
- Oil cooler, RH
- Oil filler, front top valve cover
- Oil filter and sampling valve, RH
- Oil pan, front sump, 31 L (33 qt) oil change capacity
- Oil dipstick, LH rear
- Engine oil pump (gear-driven)
- Engine shipped without oil
power take-offs
- Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide
Optional Equipment
air compressor
- Air compressors
- Air compressor governor
air inlet system
- Air cleaners
- Precleaner
- Air inlet elbow
- Air shutoffs
charging systems
- Charging alternators
- Alternator mountings
- Alternator belt tensioner
- Alternator pulleys
- Alternator guards
cooling system
- Radiators
- Fan drive and pulley - f/u/w radiator packages
- Fans f/u/w radiator packages
- Coolant level sensor
- Fan drive mountings
- Fan adapters
- Fan adapter for blower fans
- Fan pulleys
- Fan height instructions
- Vee belts for customer-supplied radiators
- Suction fans and blower fans
- Water inlet elbows
- Dry charge coolant conditioners
emissions certification
- IMO Certification
exhaust system
- Flexible fitting
- Turbocharger exhaust outlet adapters
- Elbows, flange, pipes, clamp
- Rain caps
- Manifolds
- Mufflers
flywheels and flywheel housing
- Crankshaft seal
fuel system
- Flexible fuel lines
- Water separator and fuel filters
- Fuel cooler
general
- Tool set
instrumentation
- Gauges and instrument panels
- Interconnect harnesses
- Voltmeters
- Gauge mounting
- Ammeter
lube system
- Oil pan
- Drain and cover
- Oil level gauges
- Remote oil filter
- Oil fillers
- Lubricating oil
- Fumes disposal
mounting system
- Structural steel base
- Front engine support
- Rear engine supports
power take-offs
- Enclosed clutch
- Clutch supports
- Flywheel stub shaft
- Hydraulic pump drives
- Hydraulic gear pumps
starting system
- Starting Aids
- Electric Starting Motors — 12V and 24V
- Battery Sets - 12V and 24V (dry)
- Battery Cable
C7 ACERT™ Water-Cooled Manifold Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C7 ACERT™ Hazardous Location Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C9 ACERT™ Dry Manifold Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C9 ACERT™ Water Cooled Manifold Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C11 ACERT™ Dry Manifold Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C9 ACERT™ Hazardous Location Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C13 ACERT™ Dry Manifold Petroleum Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
Similar Products
C9.3 ACERT™ Tier 4 Final Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
3516C (HD) Well Stimulation Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)
C15 ACERT™ Tier 4 Final Engine
Maximum Rating:
300.0BHP
Displacement:
441.8in³
Minimum Rating:
225.0BHP
Governor and Protection:
Electronic (ADEM™ 3)