At a glance data:
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
Overview
Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C15 ACERT engines include workover rigs, pump skids, nitrogen units, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C15 ACERT engines, with ratings: 328-444 bkW (440-595 bhp) @ 1800-2100 rpm, meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
General Specifications
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
Aspiration:
Turbocharged-Aftercooled
Flywheel and Flywheel Housing:
SAE No. 0 or SAE No. 1
Flywheel Teeth:
136 (SAE 0), 113 (SAE 1)
Rotation from Flywheel End:
Counterclockwise
Stroke:
6.75in
Bore:
5.4in
Emissions
Emissions:
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Dimensions
Length:
54.0in
Width:
37.0in
Height:
48.0in
Weight:
2743.0lb
Capacity for Liquids
Cooling System:
5.5gal (US)
Standard Equipment
air inlet system
- Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), hose connection
control system
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
cooling system
- Thermostats and housing — outlet vertical
- Jacket water pump — gear-driven, centrifugal, RH
- RH front water pump inlet
- All plugs/fittings are STOR for lines gp water
exhaust system
- Exhaust manifold — dry
- Front turbo exhaust
- Full marmon connection, maximum load 10 kg for direct connection to turbo
flywheels and flywheel housings
- See Mandatory Options
fuel system
- MEUI system
- Fuel filter, secondary, mid-mount (LH 2 micron high performance)
- Fuel transfer pump, LH front
- Fuel priming pump, LH mid-mount
- Fuel sample valve, mounted on fuel filter base
lube system
- Crankcase breather — rear valve cover
- Oil cooler — RH
- Oil filter — RH
- Oil pan — front sump
- Oil filler — LH front
- Oil dipstick — LH front
- Oil pump
- Oil valve sampling — on oil filter base
mounting system
- Front support (shipping only)
power take-offs
- Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width
- Hydraulic pump drive, SAE A, 11 tooth
general
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
- Literature group owner and operator
mandatory options
- Throttle position sensor
- Exhaust system — front or rear
- Flywheel housing or rear PTO
- Primary filter/water separator
Optional Equipment
transmission arrangement
- Transmission cooler
- Tool set
air compressor
- Air chambers
- Air compressor governor
air inlet system
- Air cleaners
- Precleaners
- Air lines
- Air inlet gasket
charging system
- Charging alternators
- Alternator mountings
- Alternator wiring
- Circuit breaker mountings
- Alternator belt guard
cooling system
- Radiator — installed
- Radiator — ship loose
- Fan drive f/u/w Caterpillar installed radiator
- Fan drives for customer-supplied radiators
- Fan height instructions
- Vee belts for customer-supplied radiators
- Aftercooler lines f/u/w Caterpillar installed radiator
- Rear-facing exhaust
- Aftercooler lines
- Suction fan adapters — attaches fan to fan pulley
- Blower fan adapter — attaches fan to fan pulley
- Blower fan
- Suction fan
- Fan belt tightener
- Coolant level sensor
- Dry charge coolant conditioners
- Dry charge coolant conditioner element
exhaust system
- Turbo exhaust connection
- Flexible fitting
- Elbows
- Flanges
- Dry elbow
C7 ACERT™ Water-Cooled Manifold Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C7 ACERT™ Hazardous Location Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C7 ACERT™ Dry Manifold Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C9 ACERT™ Dry Manifold Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C9 ACERT™ Water Cooled Manifold Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C11 ACERT™ Dry Manifold Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C9 ACERT™ Hazardous Location Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C13 ACERT™ Dry Manifold Petroleum Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
Similar Products
C9.3 ACERT™ Tier 4 Final Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
3516C (HD) Well Stimulation Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3
C15 ACERT™ Tier 4 Final Engine
Maximum Rating:
595.0BHP
Displacement:
928.0in³
Minimum Rating:
440.0BHP
Governor and Protection:
ADEM A3