At a glance data:
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
Overview
Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C27 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C27 ACERT engines, with ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 2 equivalent emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.
General Specifications
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
Aspiration:
Turbocharged-Aftercooled
Flywheel and Flywheel Housing:
SAE No. 0 or SAE No. 1
Flywheel Teeth:
136 (SAE No. 0), 113 (SAE No. 1)
Rotation from Flywheel End:
Counterclockwise
Stroke:
6.0in
Bore:
5.4in
Emissions
Emissions:
2006 EPA and CARB Tier 2, and EC Stage II Non-Road emissions certified
Dimensions
Length:
75.5in
Width:
57.6in
Height:
52.0in
Weight:
6382.0lb
Capacity for Liquids
Cooling System:
14.5gal (US)
Standard Equipment
air inlet system
- Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
control system
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
cooling system
- Thermostats and housing — outlet LH vertical orientation
- Jacket water pump — gear-driven, centrifugal RH
exhaust system
- Exhaust manifold — dry, heat shields
- Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
- Water-cooled center sections
flywheels and flywheel housings
- SAE No. 0 or SAE No. 1
- SAE standard rotation
fuel system
- MEUI system
- Fuel filter, RH ( 2 micron high performance)
- Fuel transfer pump
- Fuel priming pump (optional electric priming pump)
lube system
- Crankcase breather — rear mounted
- Oil cooler — RH
- Side turbo — oil filler in RH front gear case
- Rear turbo — oil filler in RH valve cover
- Oil level gauge — RH
- Oil filter — RH
- Oil pan rear sump
mounting system
- Front support — narrow
power take-offs
- Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
general
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
Optional Equipment
air inlet system
- Air lines
- Air cleaners
- Precleaners
charging system
- Battery chargers
- Charging alternators
- Alternator mountings
circuit breakers
- Circuit breaker mounting
cooling system
- Blower fans
- Suction fans
- Radiators
exhaust system
- Muffler
fuel systems
- Electric fuel priming pump
instrumentation
- Gauges and instrument panels
lube system
- Lubricating oil
- Oil pan
- Oil filter
mounting system
- Engine supports
power take-offs
- Hydraulic pump drives
- Pulley
- Auxiliary drive
starting system
- Electric starting motor
- Battery sets - 24V
- Battery cable
- Battery rack
- Starting aids
packaging
- Overseas preservation
- Storage preservation
- Export packaging
C7 ACERT™ Water-Cooled Manifold Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C7 ACERT™ Hazardous Location Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C7 ACERT™ Dry Manifold Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C9 ACERT™ Dry Manifold Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C9 ACERT™ Water Cooled Manifold Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C11 ACERT™ Dry Manifold Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C9 ACERT™ Hazardous Location Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C13 ACERT™ Dry Manifold Petroleum Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
Similar Products
C9.3 ACERT™ Tier 4 Final Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
3516C (HD) Well Stimulation Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3
C15 ACERT™ Tier 4 Final Engine
Maximum Rating:
1050.0BHP
Displacement:
1658.0in³
Minimum Rating:
800.0BHP
Governor and Protection:
ADEM A3